Good with Wood, Best with Batsford

BATSFORD TIMBER

Aston Magna
01608 651096
Longleat
01985 219555

Treat-Right Warranties

Through the use of next generation TANALITH E wood preservative together with the quality timbers we use and their careful preparation for treatment, we offer a choice of 10 or 15 Year TREAT-RIGHT Performance Warranties on our TANALISED pressure treated timbers.
 

10 Year TREAT-RIGHT Warranty
For our fencing timbers, we can offer a 10 Year Treat-Right Warranty on our range of ground contact Spruce peeled stakes and sawn timbers.


15 Year TREAT-RIGHT Warranty
We also offer a 15 Year Treat-Right Warranty on our range of Pine, Douglas Fir, Larch and Radiata Pine machined round and sawn timbers.



Warranty Details
Covered is the cost of re-supply by Batsford Timber, or the re-supply by Batsford Timber (at our option), of a component that is proven to have failed as a result of fungal decay or insect attack. It does not cover the costs of removal or reinstatement of such components or consequential costs or loss due to failure of the component.

The term 'fungal decay' as used in the warranty refers to wood destroying fungi that feed on and degenerate the wood cell walls. It excludes staining and mould fungi associated with the weathering of wood.
The term 'insect attack' refers to attack by wood digesting insects that destroy the timber structure.
The term 'failed' refers to damage caused by insects and/or fungi to such an extent that the component is no longer fit for purpose.

This does not affect the statutory rights of consumers, or exclude or restrict the liability of Batsford Timber for death or personal injury caused by negligence, or for fraudulent misrepresentation.

 

CONDITIONS

  1. Only Batsfords timbers that have been treated to Use Class 4 must be used in ground contact situations - Use Class 4 (BS EN 335-1).
  2. Other Batsfords out of ground timber components such as rails and boards, that have been treated to Use Class 3, should only be used for out of ground contact situations - Use Class 3 (BS EN 335-1).
  3. Should Batsfords pressure treated timbers be cross cut, notched or bored during installation, then exposed surfaces are to be liberally brushed with ENSELE end grain wood preservative to the directions shown on the product label.
  4. Timber posts must not be pointed after treatment.
  5. The shortening of timber posts should be avoided, if possible. If shortened, the cut end must never be used in ground contact.
  6. Any Batsfords pressure treated timbers which are further processed, eg. planed, must be returned to Batsfords for re-treatment.
     

EXCLUSIONS

  1. Any Batsfords pressure treated timber components supplied for use outside of European markets.
  2. Any Batsfords pressure treated timbers removed from their original installation and re-used at a new location.
  3. Additional terms and conditions apply. Full details available on request.