SOUTH WEST DEPOT
01985 219555

COTSWOLDS DEPOT
01608 651096

sales@batsfordtimber.co.uk


Warminster Bank Holiday Opening Times:

Moreton-in-Marsh Bank Holiday Opening Times:
Fri 29th Mar: 08:00-14:00Fri 29th Mar: CLOSED
Sat 30th Mar: 08:00-12:00

Sat 30th Mar: CLOSED

Sun 31st Mar: CLOSEDSun 31st Mar: CLOSED
Mon 1st Apr: CLOSEDMon 1st Apr: CLOSED
Tue 2nd Apr: 07:30-17:00 Tue 2nd Apr: 07:30-17:00 


0

Protek Stain Blocking Primer Clear 2.5L

  • In Stock
  • Product Code: PT1092
  • £37.00

  • Ex VAT: £30.83


Share:

CURRENTLY AVAILABLE SOUTH WEST DEPOT ONLY

STAIN BLOCKING PRIMER

Protek have developed an excellent water based stain blocking primer that offers better performance than both current water based and solvent borne products.

 
  • • Excellent tannin blocking performance
• Fast drying, can be top coated in an hour
• Can be used in low temperatures
• Cationic primer with flash rust resistance for nail heads
• Low VOC
 
Surface Preparation
Surfaces should be clean and dry before application.  If surfaces need to be cleaned we recommend warm water with detergent and a stiff brush. 
 
Application
Mix well before use. Protek Stain Blocking Primer can be applied by spray, brush or roller. Allow each coat to dry before applying the next; this should take up to 1 hour.  We recommend 2 coats especially if a white or off-white topcoat is being applied. If applying to bare untreated timber we recommend first applying a Wood Preserver before the primer. This primer will stop the tannin bleed from knots in the wood but it will not stop the resin coming through. If the timber is resinous a knotting agent should still be applied to the knots.
 
Use with care
• Protek Stain Blocking Primer MUST be fully dry before applying the top coat. 
• Brushes must be fully washed out before using with the top coat. 
• In their wet forms Stain Blocking Primer and other top coats are not compatible and should never be mixed.
Coverage: 1 litre will cover approximately 8m2 per coat depending on the moisture content and porosity of the surface. For best results it is recommended 2 coats are applied before the topcoat 

Write a review

Please login or register to review